For more than 30 years, we have been developing, manufacturing, and supplying premium products to leading customers in the medical, test & measurement, industrial, military, and robotics sectors. As a German technology company with a strong international footprint, we stand for quality, reliability, and continuous improvement across our global operations.
However, we can only remain world class if we continue to find new employees who make just as high demands of themselves and the quality of their work as our customers make of us at KHS. Are you one of them? Your Tasks Tests and evaluates integrated systems for managing manufacturing processes, uses analysis of human work factors, quality control, inventory control, logistics, material flow, cost analysis, and production coordination.
However, we can only remain world class if we continue to find new employees who make just as high demands of themselves and the quality of their work as our customers make of us at KHS. Are you one of them? Your Tasks Tests and evaluates integrated systems for managing manufacturing processes, uses analysis of human work factors, quality control, inventory control, logistics, material flow, cost analysis, and production coordination.
Conception: Identifies necessary production processes and capacities.New products and processes: Supports the development department in the construction of new production and construction processes according to lean aspects during the development to ensure an optimized serial production. Production tests: Plans, coordinates and controls production experiments and the implementation of new production lines and processes in cooperation with production.
Responsibilities Develop the software sequence for New equipment (EOLT) according the test equipment specificationResearch standardized solutions for production equipment Specify, design, develop, and implement test sequences for new or existing equipment considering customer requirements.Oversee the installation and operation of equipment and processes to optimize process efficiency, cycle times, and productivity.Implement changes required in the equipment (New versions / Engineering changes/ customer complains/ etc)Implement new software versions in the equipment (considering customer requirement and product status) Minimum requirements Knowledge of Labview and TestStand programmingElectronic analysis skillsElectrical/electronic diagram interpretation Vision system programming skillsKnowledge of traceability systems Die Ansprechpartner für dieses Stellenangebot HRB-Mexico E-Mail: Recruiting-MX@marquardt.com
As a Compliance Engineer, you will be responsible for providing the Design, Production, Test, and Service departments with up-to-date guidance and support to ensure that our products comply with the latest relevant legislation.
Your main responsibilities will include: Own the chemistry of our solid propellants – develop, document, and validate all fuel formulations and recipe control standards Define and maintain critical process parameters (temperature, mixing time, vacuum, catalysts, etc.) and ensure robust process windows from lab scale to full-scale production Lead and manage the analytical laboratory: raw material testing, in-process testing, test methodologies, calibration, documentation, and data traceability Drive recipe change control – plan and execute pilot batches, validation, and transfer to production, including updates of SOPs and work instructions Conduct root-cause analysis in collaboration with Process Engineering and Maintenance to address recurring defects, quality deviations and process instability Ensure full batch traceability and strong HSE practices for hazardous materials (classification, storage, transport, and safe handling) Collaborate closely with Quality Control to define sampling plans, acceptance criteria and CAPA activities (Corrective and Preventive Actions) Contribute to supplier qualification and material approval, including definition and verification of technical specifications Continuously improve yield, scrap rate and recipe cost through optimization of formulations and process parameters Maintain and prepare documentation for ISO, AQAP and defense-quality audits related to chemical operations Lead, coach, and develop your team of chemists and technologists and help build a strong safety- and quality-driven culture on site We are looking for an experienced and hands-on chemical leader who thrives in a high-tech, safety-critical production environment and enjoys building something new.
Your main responsibilities will include: Own the chemistry of our solid propellants – develop, document, and validate all fuel formulations and recipe control standardsDefine and maintain critical process parameters (temperature, mixing time, vacuum, catalysts, etc.) and ensure robust process windows from lab scale to full-scale productionLead and manage the analytical laboratory: raw material testing, in-process testing, test methodologies, calibration, documentation, and data traceabilityDrive recipe change control – plan and execute pilot batches, validation, and transfer to production, including updates of SOPs and work instructionsConduct root-cause analysis in collaboration with Process Engineering and Maintenance to address recurring defects, quality deviations and process instabilityEnsure full batch traceability and strong HSE practices for hazardous materials (classification, storage, transport, and safe handling)Collaborate closely with Quality Control to define sampling plans, acceptance criteria and CAPA activities (Corrective and Preventive Actions)Contribute to supplier qualification and material approval, including definition and verification of technical specificationsContinuously improve yield, scrap rate and recipe cost through optimization of formulations and process parametersMaintain and prepare documentation for ISO, AQAP and defense-quality audits related to chemical operationsLead, coach, and develop your team of chemists and technologists and help build a strong safety- and quality-driven culture on site We are looking for an experienced and hands-on chemical leader who thrives in a high-tech, safety-critical production environment and enjoys building something new.
Job description / Your role: Take full responsibility for the development of our cybertronic products, typically comprising one or more electric actuators, electronics, mechanical structures, software, and harnesses Supervise and coordinate all engineering activities required for product development, qualification, and industrial manufacturing Lead system engineering efforts for integrated mechanism products, ensuring performance and compliance across subsystems Define and manage system-level performance budgets (e.g. mass, power, thermal) Prepare comprehensive technical documentation, including design descriptions, development schedules, and test specifications Support product testing and qualification processes from prototype to flight-ready hardware Contribute to the Simultaneous Engineering process by collaborating with industrial process engineering teams to scale production Qualification Checklist: University degree (or equivalent) in engineering, aerospace, mechatronics, or a related technical field Professional experience in mechanism or actuator development Industry experience in the space sector, particularly with space mechanisms and electromechanical actuators Proficiency in working with technical requirements, including authoring, reviewing, and interpreting specifications Strong conceptual thinking and analytical problem-solving skills Ability to work effectively in multidisciplinary teams Fluency in English (written and spoken) Bonus Qualifications: Familiarity with numerical engineering tools used for structural, thermal, or motion analysis Initial experience in technical leadership or coordination roles Knowledge of material selection and manufacturing processes suitable for space applications Profound understanding of the full engineering workflow required to design, develop, and qualify space-grade actuators and electronics Extensive professional experience in mechanism or actuator development Benefits: Join an innovative space-tech start-up with real impact on strategy and growth Collaborate globally and work hands-on with cutting-edge research and technology Enjoy a flexible, agile work environment with 30 days of vacation and remote work options Access top industry events, continuous learning, and professional development Benefit from relocation assistance to support your move, if requiredBe part of a supportive team with room to grow as we scale together Ihr Ansprechpartner Dr.
Maintenance & Administration Perform regular maintenance for OT applications.Maintain master data based on service requests.Manage Kubernetes deployments and scaling.Ensure compliance with IT/OT security standards. Testing & Validation Conduct and coordinate testing in test environments and on-site.Document systems per Quality Management and GMP regulations.Support manual and automated testing tasks. Documentation & Training Develop and maintain system and process documentation.Deliver standard user training for supported applications.
Job description / Your role: Take full ownership for the mechanical and thermal design of LEOspace products Supervise and coordinate all related engineering activities, including mechanical design, structural analysis, thermal design, and thermal analysis Lead and support the mechanical and thermal testing and qualification of space hardware Prepare comprehensive technical documentation, including design descriptions, development schedules, and test definitions Conduct preliminary assessments of mechanical and thermal robustness within an agile development framework Support system-level testing and qualification processes Contribute to our Simultaneous Engineering approach by collaborating with industrial process engineering teams to scale the production of mechanical and thermal systems Qualification Checklist: University degree (or equivalent) in engineering, aerospace, or a related technical field Experience in the space industry, with a focus on mechanical and thermal system design Demonstrated expertise in mechanical and/or thermal analysis, with knowledge of industry best practices Familiarity with material and process selection for space applications Strong teamwork and collaboration skills Fluency in English (written and spoken) Bonus Qualifications: Strong conceptual thinking and problem-solving skills Practical experience with numerical engineering tools for mechanical and thermal analysis in space systems Initial experience in leadership or project coordination roles Benefits: Join an innovative space-tech start-up with real impact on strategy and growth Collaborate globally and work hands-on with cutting-edge research and technology Enjoy a flexible, agile work environment with 30 days of vacation and remote work options Access top industry events, continuous learning, and professional development Benefit from relocation assistance to support your move, if required Ihr Ansprechpartner Dr.
Degree in related field (Mechanical Engineering). 2. 3+ years of Quality control experience in inspecting machine/ parts of semi conductor industries, especially Tool QC / customer service related tasks. 3. Familiar with tool pre-shipment test of wafer processing machines. 4. Familiar with reading tool drawings and schematic. 5. Experience of working in clean room environment (Preferred).
Then apply now. Your Contribution Responsible to develop new test solutions for high volume optical components.Lead the development of test solutions for optical components for high volume manufacturing.In charge to characterize optical functionalities like MTF, color homogeneity, contrast etc.Responsible to develop new optical test methodologies, test specifications, test equipment, test programs and test automation in close collaboration with internal teams, customers and equipment suppliers.In charge to optimize test program, test yield and test throughput via test data analysis.The test equipment and test solution needs to be developed during the product development phase, set up during the NPI phase and finally transferred to high volume manufacturing.
Job description / Your role: Serve as the owner of our Product Quality (QA) and Product Assurance (PA) processes for space electronics Ensure that LEOspace electronic systems are designed, tested, and qualified to perform reliably in the space environment Manage specifications and coordinate test and qualification activities in line with emerging New Space standards Support electrical engineering teams in selecting components suited for space applications, with a strong focus on radiation resilience Provide QA/PA support throughout the entire product lifecycle, from early design phases through production and deployment Lead FMECA (Failure Modes, Effects, and Criticality Analysis) and RAMS (Reliability, Availability, Maintainability, and Safety) workflows across development stages Coordinate with external test providers and support procurement processes for the testing of electronic componentsContribute to industrial process engineering within our Simultaneous Engineering approach, enabling scalable production of space-qualified products Qualification Checklist: University degree (or equivalent) in electrical engineering or a related field Proven experience in the space sector, particularly with electrical systems and components Expertise in requirements engineering and in drafting specifications at the equipment, unit, and component levels Knowledge of COTS (Commercial Off-The-Shelf) component qualification, including delta qualification for space use Familiarity with radiation testing methodologies for COTS components and experience in part screening for space environments Fluency in English (written and spoken) Bonus Qualifications: Hands-on experience in executing radiation testing of electrical parts, covering the entire process from datasheet review and part selection trade-offs to test definition, execution, and data analysis Extensive professional experience, preferably in the space or aerospace industry Strong background in Quality Assurance and Product Assurance for electrical products used in space applications Benefits: Join an innovative space-tech start-up with real impact on strategy and growth Collaborate globally and work hands-on with cutting-edge research and technology Enjoy a flexible, agile work environment with 30 days of vacation and remote work options Access top industry events, continuous learning, and professional development Benefit from relocation assistance to support your move, if requiredBe part of a supportive team with room to grow as we scale together Ihr Ansprechpartner Dr.
WHAT YOU WILL DO Present to or influence customer representatives or vendors and resolve issues Conduct interviews with customers to establish their requirements, presenting concepts and proposals, and providing updates on deliverables Act as a coordinator across projects to prevent delays or misunderstandings Coordinate collaboration with external service providers in terms of assembling own or third-party system components Customize COTS based on pre-determined parameters, and executes customizing tests Document work using the required standards, methods and tools Assist in definition, initiation and design of architecture in projects/ programs Provide expert advice, training and technical assistance to development team, lower level service and support staff May lead others in developing innovative solutions to highly complex problems and contribute to employees’ professional development Act as technical lead of development teams on issues of performance, tools, and standards WHAT YOU SHOULD HAVE 11 years of experience in software engineering with relevant qualifications in IT field and methods including formal methods (e.g.
Ihre Aufgaben: Die Abteilung Production Engineering ist verantwortlich für die Produktionsentwicklung und Industrialisierung sowie die Arbeitsvorbereitung aller Produktionsprojekte im Bereich ziviler Trägerraketensysteme, Raumfahrzeuge und den dazugehörigen Komponenten am Bremer Standort. Beschreibung der Manufacturing, Assembly, Integration & Test Prozesse in Fertigungsaufträgen und Standard Operation Instructions (SOIs)Erstellen, Überarbeiten und Optimierung von Arbeitsplänen mit Vorgängen und Planzeiten.
Your work: Design and develop great conversational experiences for customer-facing chatbots Create conversational trees and make them (a)live using state-of-the-art Artificial Intelligence tooling Work with internal and external customers to transform their thoughts into conversations Create and monitor automated conversational test suites Use Conversational eXperience (CX) framework to maintain great quality Draw insights from conversational analytics to keep improving the bots Contribute to development of NLP culture in DPDHL Proactively look for improvements that take the robot out of the human and help server our customers better Advise on the best conversational approach for both text and voice experiences Communicate with colleagues across the world, lead presentations, workshops and trainings What do we expect from you?
Konzeption und Umsetzung von GenAI-Anwendungen mit Retrieval Augmented Generation (RAG) Entwicklung und Integration von Backend Services in Python Integration von KI-Systemen in bestehende Systemlandschaften und APIs Sicherstellung von Datenqualität und Data Readiness für KI-Anwendungen Umsetzung von Schnittstellen zwischen Datenquellen, KI-Modellen und Zielsystemen Unterstützung bei Freigabeprozessen und Governance Fragen rund um KI-Systeme Aufbau stabiler Fallback- und Fehlerbehandlungsmechanismen Mitwirkung bei Tests, Qualitätssicherung und produktiver Betriebsfähigkeit Zusammenarbeit mit Fachbereichen und IT zur Integration der KI-Lösung Fundierte Python- und Backend-Entwicklungserfahrung, sowie Erfahrung mit Generative AI und RAG-Architekturen Nachweisbare Projekterfahrung mit produktiven KI-Systemen Erfahrung in Systemintegration und API-Anbindungen, sowie Verständnis für Datenqualität und Datenaufbereitung für KI Erfahrung im Umgang mit Schnittstellen, Datenflüssen und Integrationsarchitekturen Erfahrung mit Security- und Datenschutzanforderungen bei KI-Systemen Erfahrung mit Testing-Strategien für KI-Anwendungen Implementierung von Fallback-Logiken und Fehlerbehandlung Erfahrung mit Cloud-naher Umsetzung, idealerweise im Umfeld IONOS Cloud Erfahrung mit Deployment und Betrieb von KI-Systemen Wünschenswert: Erfahrung mit Datenverarbeitung und Data Readiness, Kenntnisse in Logging, Monitoring und Tracing, Verständnis von Contact Center- oder Ticketing-Systemen, Erfahrung mit Observability in Backend-Systemen Eine übertarifliche Bezahlung Jährlicher Urlaubsanspruch von 30 Tagen Hays ermöglicht den Einstieg bei innovativen Unternehmen Ihr Kontakt Ansprechpartner Stepan Karapetyan Referenznummer 866190/1 Kontakt aufnehmen E-Mail: stepan.karapetyan@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Mein Arbeitgeber Language: English Administer and maintain Azure AI Foundry workspaces, environments, model catalogs, compute and configurations Manage lifecycle operations for LLMs, embeddings models and model deployments within the platform (excluding agent deployment) Ensure reliability, scalability, and performance of AI Foundry environments across all stages (dev/test/prod) Configure and maintain logging, tracing, telemetry and usage dashboards Monitor performance, cost, quota consumption and operational health of AI Foundry components Implement alerting and diagnostics to ensure platform stability Apply and maintain Azure RBAC, workspace governance and access policies inside the platform Ensure consistency in workspace structure, permissions and operational standards across teams Support internal teams in onboarding and safe platform usage Produce high quality documentation, runbooks, platform guides and onboarding materials Assist internal teams in using AI Foundry capabilities effectively / Provide hands-on troubleshooting and support for platform adoption Practical, hands-on experience managing Azure platforms in production environments Strong knowledge of Azure AI Foundry, Azure OpenAI, and related Azure AI/ML components Familiarity with LLM lifecycle management, platform operations, and governance Experience working autonomously within engineering or platform teams Strong communication skills and ability to assist internal teams Proven ability to produce clear and structured documentation Experience with Portkey for model routing, observability, caching, or guardrails Knowledge of Azure API Management (APIM) Understanding of other AI ecosystem tools such as Promptflow, MLflow, LangChain, or Semantic Kernel Exposure to cloud security best practices Start: April 2026 Remote work possible Ihr Kontakt Referenznummer 863216/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Freiberuflich für ein Projekt
Betriebserfahrung, Aufgaben, Analyse) Gestalten und prüfen von Hardware und Software MMS (Usability Testing, Überprüfung am Simulator) Identifizieren und Verfolgen von technischen Änderungen sowie bewerten der Einflüsse auf die MMS Prüfen von Konzepten sowie deren Freigabe Klären der HFE-relevanten und technischen Themen mit internationalen Kunden und Behörden Klärung von internen und externen Schnittstellen im Projekt- Kommunikation mit Fachabteilungen Ihr Profil Erfahrung im Bereich Human factor engineering (HFE) erforderlichErfahrung im Bereich Human Maschine Interface Design (Styleguide, Alarm System) erforderlichZertifizierung oder Ausbildung im Bereich Usability erforderlichEigenständiges Erstellen von Berichten und strukturiertes arbeiten erforderlichSelbständiges Durchführen von Usability Aufgabenstellungen und Tests erforderlichSehr gute Kenntnisse in DeutschSehr gute Kenntnisse in Englisch Das klingt nach einer spannenden Aufgabe für Sie? Dann freuen wir uns auf Ihre Bewerbung!
Register-Level-Programmierung und Peripherie-Initialisierung Berücksichtigung von Robustheit, Fehlertoleranz, Watchdog-Konzepten und Industriebedingungen Qualifizierung der Firmware an bestehenden oder selbst entwickelten Testaufbauten Aufbau und Nutzung automatisierter Tests (z. B. Unit-Tests, Hardware-in-the-Loop, Regressionstests) Enge Zusammenarbeit mit Hardware, Produktmanagement, Qualität, Produktion und Service DEIN PROFIL- WAS WIR WIRKLICH ERWARTEN Mehrjährige Berufserfahrung in der Embedded Software Entwicklung in Rust und C Sehr gutes Verständnis für Mikrocontroller-Architekturen und systemnahe Programmierung Sicherer Umgang mit Git und strukturiertem Konfigurationsmanagement Erfahrung mit Toolchains, Cross-Compilern und sauberen Build-Prozessen Analytische Denkweise, hohe Eigenverantwortung, Hands-on-Mentalität Anspruch an Codequalität, Stabilität und Wartbarkeit Sehr gute Deutsch- und Englischkenntnisse WAS DIESE POSITION BESONDERS MACHT Deine Software ist Teil realer Serienprodukte – kein internes Tool, kein Prototyp Du arbeitest an Systemen, die jahrelang zuverlässig im Feld laufen müssen Technische Entscheidungen werden hier nicht wegdelegiert Kurze Entscheidungswege, direkter Einfluss, keine Konzernpolitik WAS WIR BIETEN Technisch anspruchsvolle Produkte statt Spielwiesen Gestaltungsspielraum ab Tag 1 Direkter Einfluss auf Produktgenerationen Attraktive Vergütung und stabiles Umfeld Idealer Standort im Rhein-Main-Gebiet (Wiesbaden, Mainz, Frankfurt, Gießen, Koblenz) BEWERBUNG Wenn du Embedded Systems nicht nur programmieren, sondern beherrschen willst, dann bist du hier richtig. karriere(at)hydrotechnik.com Ihr Ansprechpartner bei der Hydrotechnik ist Elisa Heuser +49 6431 4004-727
FMEA, Risk Assessments) im Entwicklungsprozess Nutzung von Lessons Learned zur kontinuierlichen Verbesserung zukünftiger Produktentwicklungen Initiierung und Umsetzung von Verbesserungsmaßnahmen zur Erhöhung der Produktqualität Koordination von Tests und Zertifizierungen mit externen Prüflaboren Sicherstellung aller relevanten regulatorischen und normativen Anforderungen Ansprechpartner:in für Lieferanten bei qualitätsrelevanten Fragestellungen Unterstützung der Projektteams in Qualitätsfragen entlang des gesamten Entwicklungsprozesses Dokumentation aller Qualitätsaktivitäten, Testergebnisse und Konformitätsnachweise Die Kapitel deiner bisherigen Story: Abgeschlossenes technisches Studium oder vergleichbare Qualifikation Mehrjährige Erfahrung im Qualitätsmanagement oder in der Produktentwicklung Gute Kenntnisse relevanter Normen, regulatorischer Anforderungen und Prüfverfahren Erfahrung mit Risikoanalysen (z.
WHAT YOU WILL DO Present to or influence customer representatives or vendors and resolve issues Conduct interviews with customers to establish their requirements, presenting concepts and proposals, and providing updates on deliverables Act as a coordinator across projects to prevent delays or misunderstandings Coordinate collaboration with external service providers in terms of assembling own or third-party system components Customize COTS based on pre-determined parameters, and executes customizing tests Document work using the required standards, methods and tools Assist in definition, initiation and design of architecture in projects/ programs Provide expert advice, training and technical assistance to development team, lower level service and support staff May lead others in developing innovative solutions to highly complex problems and contribute to employees’ professional development Act as technical lead of development teams on issues of performance, tools, and standards WHAT YOU SHOULD HAVE 11 years of experience in software engineering with relevant qualifications in IT field and methods including formal methods (e.g.
You will also produce test scripts, materials and regression test packs to test new and amended software or services. At DHL IT Services, your talent is our passion.
• Consult, support and make the applications successful on the container platform. • Further develop, test and implement the platform across new regions, technologies and infrastructures (on-premise / on cloud). • Work in a small, highly skilled, highly motivated and globally spread team of unique professionals on the mission to redefine IT in DHL
WHAT YOU WILL DO Provide low-level design for platforms supported within area of responsibility in IT Services Develop, test, implement and maintain/drives standards for platform build and management, in cooperation with other Infrastructure and Operations teams, peers from other IT Services locations and related global structures Define and maintain operation procedures for the platform, contribute to capacity planning and HW setup standards Provide 3rd level support for the infrastructure mentioned above, work on problem resolution and implement selected changes (including patching, upgrades, etc.) in cooperation with production operations and other departments and vendors Actively cooperate and contribute on other product/platform related tasks WHAT YOU SHOULD HAVE: Deep knowledge of RHEL operating system (senior administration level).
Additionally, we offer internal training programs and expert lectures conducted by our project team members, covering topics relevant to quality managers, project managers, design engineers, FEM analysts, test engineers, programmers, and automation specialists. uberi zirnij schrift
WHAT YOU WILL DO ·Assist resolving issues of minor significance ·Help to liaise with other internal departments or project teams for completion of project deliverables ·Apply standard methodologies when creating new programs and applications (developing and coding from specifications) or when maintaining existing ones ·Assist in customizing Commercial off-the-shelf (COTS) based on pre-determined parameters, and executes customizing tests ·Document work using the required standards, methods and tools e.g. produce program and system documentation ·Work with team/ colleagues to ensure plans, processes and activity are aligned to customer needs ·Actively share knowledge or experience with others ·Provide additional support when colleagues require time away to attend training/ development programs ·Convey consistent stated personal values through actions and decisions ·Apply data analysis and data modeling techniques to establish, modify or maintain a data structure and its associated components ·Design, code, test, correct, and document simple programs, and assist in the implementation of software which forms part of a properly engineered information or communications system APPLICATION YOU WILL USE: ·Java and J2EE frameworks, HTML, CSS, JavaScript, WebLogic, Spring, Hibernate and JSF WHAT YOU SHOULD HAVE: If you are highly motivated, creative and desireto start and develop your IT career in afast-paced environment, you have come to the right place!
WHAT YOU WILL DO Assist resolving issues of minor significance Help to liaise with other internal departments or project teams for completion of project deliverables Apply standard methodologies when creating new programs and applications (developing and coding from specifications) or when maintaining existing ones Assist in customizing Commercial off-the-shelf (COTS) based on pre-determined parameters, and executes customizing tests Document work using the required standards, methods and tools e.g. produce program and system documentation Work with team/ colleagues to ensure plans, processes and activity are aligned to customer needs Actively share knowledge or experience with others Provide additional support when colleagues require time away to attend training/ development programs Convey consistent stated personal values through actions and decisions Apply data analysis and data modeling techniques to establish, modify or maintain a data structure and its associated components Design, code, test, correct, and document simple programs, and assist in the implementation of software which forms part of a properly engineered information or communications system APPLICATION YOU WILL USE: Java and J2EE frameworks, HTML, CSS, JavaScript, WebLogic, Spring, Hibernate and JSF WHAT YOU SHOULD HAVE: If you are highly motivated, creative and desire to start and develop your IT career in a fast-paced environment, you have come to the right place!
WHAT YOU WILL DO Assist resolving issues of minor significance Help to liaise with other internal departments or project teams for completion of project deliverables Apply standard methodologies when creating new programs and applications (developing and coding from specifications) or when maintaining existing ones Assist in customizing Commercial off-the-shelf (COTS) based on pre-determined parameters, and executes customizing tests Document work using the required standards, methods and tools e.g. produce program and system documentation Work with team/ colleagues to ensure plans, processes and activity are aligned to customer needs Actively share knowledge or experience with others Provide additional support when colleagues require time away to attend training/ development programs Convey consistent stated personal values through actions and decisions Apply data analysis and data modeling techniques to establish, modify or maintain a data structure and its associated components Design, code, test, correct, and document simple programs, and assist in the implementation of software which forms part of a properly engineered information or communications system APPLICATION YOU WILL USE: Java and J2EE frameworks, HTML, CSS, JavaScript, WebLogic, Spring, Hibernate and JSF WHAT YOU SHOULD HAVE: If you are highly motivated, creative and desire to start and develop your IT career in a fast-paced environment, you have come to the right place!
WHAT YOU WILL DO Assist resolving issues of minor significance Help to liaise with other internal departments or project teams for completion of project deliverables Apply standard methodologies when creating new programs and applications (developing and coding from specifications) or when maintaining existing ones Assist in customizing Commercial off-the-shelf (COTS) based on pre-determined parameters, and executes customizing tests Document work using the required standards, methods and tools e.g. produce program and system documentation Work with team/ colleagues to ensure plans, processes and activity are aligned to customer needs Actively share knowledge or experience with others Provide additional support when colleagues require time away to attend training/ development programs Convey consistent stated personal values through actions and decisions Apply data analysis and data modeling techniques to establish, modify or maintain a data structure and its associated components Design, code, test, correct, and document simple programs, and assist in the implementation of software which forms part of a properly engineered information or communications system APPLICATION YOU WILL USE: Java and J2EE frameworks, HTML, CSS, JavaScript, WebLogic, Spring, Hibernate and JSF WHAT YOU SHOULD HAVE: If you are highly motivated, creative and desire to start and develop your IT career in a fast-paced environment, you have come to the right place!
Design physical interfaces between systems (mechanical and/or electrical systems) and primary structureCreate and release detail part- and installation drawings for production and test aircraftPlanning of the required systems installation activities and the required competences and capabilities according to defined deliverablesResponsible for deliverables in Time / Cost / Quality (TCQ) throughout the complete lifecycle of aircraft, flying fleet, 328eco development and respective R&T projectsLeading functional the allocated resources within system installation work package to ensure deliverablesDefine and drive opportunities for digitalisation and automatisation of airframe design analysis processes, methods & toolsEstablish the required check procedures and progress monitoring aligned with the program process to ensure deliverables at time and quality Your Qualifications Recognised expertise in field of systems installation / airframe designExperience with MRO support of in-service legacy fleetExperience with legacy design processes, methods and tools (2D drawings, legacy PLM and config tools)Educated Engineering degree (MA Eng/Sc, Dr.
INGENTIS Group sucht in eine/n Software Test Engineer (m/w/d) (ID-Nummer: 13753678)
Mentz GmbH sucht in eine/n Senior Test Engineer für Verkehrsplanungssysteme (w/m/d) (ID-Nummer: 13751457)
Rheinmetall Landsysteme GmbH sucht in eine/n Test Engineer Umweltsimulation (m/w/d) (ID-Nummer: 13571386)
Ratbacher GmbH sucht in eine/n Software Tester (m/w/d) - Test Engineer (ID-Nummer: 12291587)
Autohaus Royal GmbH sucht in Berlin eine/n Senior Test Automation Engineer (m/w/d) (ID-Nummer: 13757961)
Ratbacher GmbH sucht in eine/n Software Entwickler Java (m/w/d) - Test Automation Engineer (ID-Nummer: 12290965)
Narda Safety Test Solutions GmbH sucht in eine/n Field Application Engineer HF und Spektrumanalyse (m/w/d) (ID-Nummer: 13552849)
Techem Energy Services GmbH sucht in eine/n (Senior) Test Automation Engineer - TSS (m/w/d), in Voll- oder Teilzeit (ID-Nummer: 13743077)
Techem Energy Services GmbH sucht in eine/n (Senior) Test Automation Engineer - Mobile Apps (m/w/d), in Voll- oder Teilzeit (ID-Nummer: 13742119)
Informatik, Software Engineering, Computer Science oder vergleichbar Praktische Implementierungsfähigkeit in C++ Berufserfahrung in den Bereichen Architektur/ Design, Tests, Build(CMake) und/ oder fortlaufende Integration von Software (CI) Kenntnisse in Anwendung obengenannter Tools Erfahrung im Bereich Autonom, Guidance, Obstacle Aviodance (2D/3D), SDF oder vergleichbare Themen Interesse an moderner Softwareentwicklung Gute Deutsch- und Englischkenntnisse Beritschaft zu gelegentlichen internationalen Dienstreisen Was wir Ihnen bieten: Einen festen Arbeitsvertrag nach DGB/GVP-Tarifvertrag Eine übertarifliche Vergütung, zzgl.
Tätigkeiten: Kundenerlebnis sichern: Sicherstellen der Software-Qualität in KundenprojektenFehler früh sichtbar machen: Entwurf, Ausführung und Auswertung von TestfällenTestbarkeit herstellen: Review von Anforderungen auf Umsetzbarkeit und RisikenRelease-Sicherheit schaffen: Automatisieren von UI- und API-Tests inkl. Auswertung und Abweichungsanalyse Effizienz im Prozess erhöhen: Integration automatisierter Tests in Azure DevOps Technisches Fundament: Studium im Bereich Software / Informatik oder vergleichbare AusbildungQualitätsfokus: Erfahrung im Bereich Softwaretesting bzw.
Darauf haben Sie Lust Sicherstellung, Durchführung und Kontrolle der Inbetriebnahme inkusive Einhaltung der Arbeitsschutzbestimmungen nach UVV Überwachung der Terminplanung und des Inbetriebnahmefortschritts Vorbereitung, Durchführung und Nachbereitung von Inbetriebnahmen unserer Anlagen und Komponenten auf unseren Baustellen Installation von Softwareapplikationen sowie Test, Optimierung und Prüfung der Steuerungssoftware Einstellung und Einrichtung von mechatronischen Komponenten Durchführung von Störungsanalyse und -behebungen Schulung und Einweisung der Kunden Periodische Berichterstattung der Inbetriebnahmeaktivitäten Erstellung der Inbetriebnahmedokumentation (Parameter, Set-Point Listen, etc.)
Tätigkeiten Weiterentwicklung und Optimierung eines technischen Monitoring- und KontrollsystemsKonzeption, Design und Implementierung von Software-ModulenIntegration, Inbetriebnahme und Test von SystemkomponentenErstellung und Pflege technischer DokumentationenUmsetzung von Anwendungen für sicherheitskritische Systeme unter Einhaltung definierter ProzesseMitarbeit in einem erfahrenen, interdisziplinären Team Profil Abgeschlossene technische Ausbildung (HTL, FH oder Universität) mit IT-SchwerpunktSehr gute Programmierkenntnisse in C++ und Java wünschenswertMehrjährige Erfahrung in der Entwicklung von Java- und J2EE-Anwendungen vorteilhaftVertraut mit aktuellen Java-Technologien und Frameworks sowie gängigen Tools wie Ant oder JenkinsErfahrung mit Datenbanksystemen wie Oracle und PostgreSQLKenntnisse in CORBA und gRPC von VorteilGute Englischkenntnisse in Wort und SchriftTeamorientierte Arbeitsweise und ausgeprägte Kommunikationsfähigkeit Benefits Attraktives Jahresbruttogehalt von EUR 67.200,- (Überzahlung je nach Qualifikation und Erfahrung möglich)Mobilitätspauschale - Die Fahrtkosten für öffentliche Verkehrsmittel auf dem Weg zum und vom Arbeitsplatz werden von uns übernommenBerufliche Weiterentwicklung ist uns wichtig – deshalb bieten wir Dir individuelle Fortbildungsmöglichkeiten in unserem efinio AusbildungszentrumDu arbeitest in einem familiären Team mit flachen Hierarchien und einer offenen Du-KulturWir bieten flexible Arbeitszeiten und Home-Office zur Förderung der Work-Life-BalanceRegelmäßige Teamaktivitäten wie z.B.: Kartfahren sorgen für gemeinsamen Spaß außerhalb des Arbeitsalltags Zusätzliche Information (intern) https://efinio.bewerberportal.at/job/264074?
Ihre Aufgaben Entwicklung von webbasierten HMI-Lösungen für automatisierte Fertigungssysteme, um den Benutzern eine intuitive und benutzerfreundliche Schnittstelle zur Steuerung der Systeme zu bieten Entwicklung von PC-Software zur Vernetzung von automatisierten Fertigungssystemen, um die Kommunikation zwischen verschiedenen Systemen zu optimieren und zu automatisieren Entwicklung von Konfigurations- und Test-Software Konzipierung und Spezifikation von technischen Lösungen in Zusammenarbeit mit internen und externen Kunden Kontinuierliche Verbesserung von bestehenden Produkten, um unsere Systeme effizienter, zuverlässiger und sicherer zu machen Technische Unterstützung anderer Fachabteilungen Ihr Profil: Sie haben ein abgeschlossenes Bachelor- oder Masterstudium im Bereich Informatik oder einem vergleichbaren Bereich erfolgreich absolviert Sie verfügen über Erfahrung in der Programmierung mit C# .Net Full Framework und .NET Core.
Third-Level Support & Eskalation: Unterstützung der SOC-Analysten bei der Bewertung komplexer sicherheitsrelevanter Ereignisse und kritischer Alarme.Detections as Code (DaC) Pflege: Pflege der Detection-Regeln in Versionskontrollsystemen (z. B. Git) und Unterstützung beim Aufbau von CI/CD-Pipelines für Test und Deployment von Regeln. Du bringst mit: Abgeschlossene IT-orientierte Ausbildung oder ein abgeschlossenes technisches Studium (z.
B. mit phyton, Ansible, Kubernetes, GitOps-Ansätze)Aufbau effizienter Build-, Test- und Release-Pipelines und Etablierung eines modernen, professionellen BetriebsmodellsEinsatz und Administration von Lösungen führender Hersteller wie Cisco, VMware, Nutanix, Microsoft, Fortinet, etc.Aufbau und Pflege von Standards, Monitoring- und Observability-Lösungen sowie im Lifecycle- und Kapazitätsmanagement zur Sicherstellung optimaler Systemauslegung Erfolgreich abgeschlossenes Studium der Fachrichtung Informatik, Wirtschaftsinformatik, oder eine vergleichbare AusbildungFundierte Praxiserfahrung in der IT-InfrastrukturGute Kenntnisse im Bereich ProjektmanagementAnalytisches und abstraktes Denkvermögen, um komplexe IT-Architekturen zu entwickeln und Infrastrukturbetrieb in standardisierte, skalierbare Services zu transformierenLeidenschaft für die Weiterentwicklung, Automatisierung und Standardisierung von Infrastrukturservices, um eine zukunftsfähige, professionelle IT-Serviceorganisation zu schaffenNicht nur technisches Know-how mit, sondern auch die Fähigkeit, Innovationen voranzutreiben und ein motiviertes Team auf dem Weg zu einer modernen IT-Serviceorganisation zu unterstützenVerhandlungssichere Deutsch- und gute Englischkenntnisse Abwechslungsreiche Tätigkeit in einem renommierten UnternehmenHohes Maß an Eigenverantwortung Ihr Kontakt Ansprechpartner Sarah Jahns Referenznummer 854031/1 Kontakt aufnehmen E-Mail: sarah.jahns@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Selbstständige Planung, Durchführung, Auswertung und Dokumentation von Integrationstests im BSL-1 Labor in unterschiedlichsten ProjektphasenAbstimmung der Integrationstests mit internen Schnittstellen und regelmässige Kommunikation an relevante Stakeholder über den Fortschritt der IntegrationstestsVerantwortlich für den Fortschritt der Systems Testing Aktivitäten innerhalb des Projektes gemäss der definierten ArbeitspaketeSie erstellen die erforderlichen technischen Dokumentationen in englischer SpracheSelbständiges Auswerten, Interpretieren und Präsentieren der Testergebnisse nach Regulatorischen und Projektspezifischen AnforderungenIdentifikation, Minimierung, Verfolgen und Reporten von Risiken und Issues nach Prozess und / oder ProjektdefinitionenReview von Produktanforderungen/Requirements hinsichtlich Testbarkeit und die Erstellung von Testfällen für die Verifikation dieser AnforderungenHinterfragen bestehender Laborprozesse, Identifikation von Optimierungsbedarf aus technischer und naturwissenschaftlicher Sicht und anschließende selbstständige Umsetzung Bachelor/Master Abschluss oder Ausbildung mit fundierter ErfahrungErste Test Erfahrung, idealerweise im Medical Device UmfeldSichere Programmierkenntnisse: entwickeln von internen Test-Frameworks und Analyse-Tools weiter mit Unterstützung von Git als Versionierung ToolPython Expertise (z.